TopicPath
  1. TOP PAGE
  2. PRODUCTS

PRODUCTS

Moriyasu Corporation Medical Cannula,Pointed Needle,Ground Cannula

Moriyasu Corporation supply cannulae based on customer specifications and designs, within our own exacting tolerance range. Moreover, in order to meet customers’ needs, we boldly take on new challenges, such as specialized requirements (tight tolerance, minimal external diameter, maximal/minimal internal diameter, minimal overall length (with lancet point), taking pride in supplying products that make us pioneers in cutting-edge medical technologies.

Point Style

  • BiasBias
  • LancetLancet
  • Back-cutBack-cut
  • CrownCrown
  • Triangle WireTriangle Wire
  • Double points withDouble points with
    intermediate blasting

End Shape

  • RadiusRadius
  • ChamferChamfer

Standard Processing

Micro Blasting

Micro Blasting

Removes heel-burrs on the point heel by air-blasting with ultra-fine glass beads. We also do non-coring processing on request.

Electro Polishing

Electro Polishing

Uses an electrolytic device, and remove burrs from the point tip with electrochemical processing.

Secondary Treatment

Grit Blasting

Grit Blasting

Surface processing, mainly to enhance strength of bonding with other parts.
1) Standard: After blasting (270-degree), two silver lines are left on the surface of the pipe, but this has no impact on standard bonding.
2) Special: Blasts the entire circumference of the pipe (360-degree), for more effective bonding.
3) Middle Blasting: Blasts the middle portion of the full length of the cannula. Both 270-degree and 360-degree are possible.

Notch

Notch

Cuts notches in the cannulae.

Markings

Markings

Applies markings to the cannulae.

Dermal Punch

Dermal Punch

Sharpens the external/internal diameter at the tip of cut-offs using specialized technology.